SilverCrest SBB 850 B1 Mode D'emploi page 77

Masquer les pouces Voir aussi pour SBB 850 B1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Display
Display for
selecting the weight (750 g, 1000 g, 1250 g)
a
the remaining baking time in minutes and the
b
preselected programme time
the selected browning level (Light
c
Medium
the selected programme number
d
the programme sequence
e
the addition of ingredients ("ADD")
f
GB
Start/Stop
To start and stop operation or to delete a timer
programme.
To interrupt operation, briefly press the Start/Stop
button
until you hear a beep and the time flashes
on display
. If you press the Start/Stop button
again within the next 10 minutes, operation will be
resumed. If you forget to restart the programme, it
will resume automatically after 10 minutes.
To completely terminate the operation or to delete
a programme, press the Start/Stop button
3 seconds, until you hear a long beep.
NOTE
Do not press the Start/Stop button
want to simply check the condition of the
bread. You can check the baking progress
through the viewing window
CAUTION!
You should always hear a beep when pressing
any button while the appliance is running.
74
, Dark
, Rapid
.
Browning level
(or rapid mode)
Select the browning level or switch into the rapid
mode (Light/Medium/Dark/Rapid). Press the
browning level button
arrow appears above the desired browning level.
,
For programmes 1–4 you can, through repeated
)
pressing of the browning level button
the rapid mode to shorten the baking process.
Press the browning level button
the arrow appears above "Rapid" icon. A browning
level cannot be selected with the programmes 6,
7 and 11.
Timer
Time-delayed baking.
NOTE
Time-delayed baking cannot be set for
programme 11.
Operating light
The operating light
for
is running.
If you want to start a programme with a time delay,
the operating light
setting is confirmed. As soon as the programme
if you
starts, the operating light
Bread weight
Select the bread weight (750 g/1000 g/1250 g).
Press the button repeatedly until the arrow appears
under the desired weight. The weight specifications
(750 g/1000 g/1250 g) refer to the total amount
of ingredients placed in the baking mould
NOTE
The default setting when switching the appli-
ance on is 1250 g. You cannot adjust the
bread weight with the Programmes 6, 7, 11
and 12.
repeatedly, until the
, activate
repeatedly until
lights up when a programme
flashes as soon as the timer
lights up permanently.
.
SBB 850 B1

Publicité

Table des Matières
loading

Table des Matières