Publicité
Les langues disponibles
Les langues disponibles
exercise requirements. To reduce
pedal resistance turn the tensioning
control (W) anticlockwise (-).
10 LEVELLING.-
Once the unit has been placed into its
final position, make sure that it sits flat
on the floor and that it is level. This
can be achieved by screwing the
adjustable feet (d) up or down, as
shown in Fig.13.
11 MOVEMENT & STORAGE.-
The unit is equipped with wheels (f) to
make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.14. Store your unit in a dry place,
preferably not subject to changes in
temperature.
12 MAINS CONNECTION.-
(Mod H-493).-
Insert the jack (g) on the transformer
(c) into the connection hole (h) on the
main body (A) (bottom, rear of the
machine)
transformer into a 220 V mains supply,
Fig.15.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
11
and
then
plug
the
Publicité
