dji OSMO MOBILE Guide De Démarrage Rapide page 6

3. Mount and Balance the
Mobile Phone
With the Osmo Mobile powered off, loosen the
Holder Lock Knob, place the mobile phone in the
mobile phone holder and tighten the knob to secure
its position.
The system is balanced if the mobile phone remains
level when released, balanced only by the gimbal.
Left
2
If the roll axis tilts to
the left, pull out the
arm until the roll axis
remains level.
Do not power on the Osmo Mobile without a mobile
phone. The Osmo Mobile will not work if no device is
detected by the Mobile Phone Detection Sensor.
It is important to balance the mobile phone in order to
achieve optimal performance. The Osmo Mobile should
only be balanced when powered off.
1
Right
1
2
If the roll axis tilts to
the right, adjust the
mobile phone to the
left until the roll axis
levels out.
7