Using The Unit - Vortice VORT SUPER DRY Notice D'emploi

ENGLISH

Using the unit

See fig. 4:
- Heating switch button OFF:
heating element off, for summertime operation;
- Heating switch button ON:
-- Speed switch button L: heating element always on;
-- Speed switch button heating element on if room T < 20°C, off if room T > 25°C.
• Stretch out both hands and insert
them all the way in.
The unit starts to run automatically.
(Fig.6)
6 6
Self-check indicator
When a malfunction or error occurs, the self-check
indicator on the right side will either light up or flash.
Turn off the power switch, wait about 40 seconds until all
the indicators go off, then turn on the power switch.
If the indicator still lights up or flashes, turn off the power,
disconnected the unit from the socket, and contact your
dealer immediately.
Usage label
Stick the usage label on the visible place (the front of the
unit or the wall nearby) (Fig.9)
When using the unit:
• Turn on the power switch
• The power indicator lights up
• The lamp lights up
• The cover of power supply is closed
• Pull them out slowly, letting the air
blow the water off. (Fig.7)
7 7
9 9
• Pull them out completely. (Fig.8)
8 8
19