Güde GRW 1800 Traduction Du Mode D'emploi D'origine page 16

ENGLISH
12
Work instructions
Do not reach into the rotating mixer (rotating
stirrer).
Hold the device firmly with two hands and away from
your body.
Avoid splashing! Work with low revolutions when im-
mersing or removing the mixed to / from the mixture
being stirred.
The stirring extensions included in the supply are
suitable for stirred materials with heavier and tougher
consistency: e.g. mortar, grouts, cement, plaster,
whitewash, concrete, screed, etc.
• Increase the revolutions when stirring. Run the mi-
xer in the mixture being stirrer until it is completely
mixed. Follow the processing instructions of the
manufacturer.
• Do not work with low revolutions in continuous
operation. This would lead to engine overload /
overheating.
Maintenance
Unplug the machine before any work on it.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Do not clean the plastics with solvents, flammable or
toxic fluids. For cleaning, use a damp cloth only.
After each use, clean the stirring mechanism properly.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer or
its customer service or a similarly qualified person to
avoid danger.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.