Bosch PUC-EXACT 1 Notice Originale page 11

OBJ_BUCH-1527-001.book Page 11 Thursday, December 22, 2011 11:16 AM
Symbol Meaning
V Volt Electric voltage
A Ampere Electric current
W Watt Power output
Hp Horsepower
Hz Hertz Frequency
Direct current Type of current and voltage
DC direct current
Single-phase al- Type of current and voltage
ternating cur-
rent
AC
alternating cur-
rent
Protection class In certain cases, products of
I according to protection class I must be con-
DIN: Protective nected to earth.
earth (protec-
tive conductor)
CE Marking With the CE Marking, Bosch
confirms the conformity of the
product with the appropriate
guidelines of the European
Community.
CSA Certifica- Products with this certification
tion Marks mark were tested by the "Ca-
nadian Standards Association"
and meet the applicable safety
and performance standards in
Canada and the USA.
Warning indica- Informs the user of the correct
tion product handling or warns
against hazards.
Mandatory Provide information on correct
signs handling, for example: Use
product only in enclosed work
sites, Read operating instruc-
tions and Do not discard unit
into household waste.
Technical Data
Power supply unit
Article number
Number of connection sockets
Mains supply (alternating current)
– Input voltage
– Input power
– Input frequency
Bosch Power Tools
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the fold-out
page with the illustration of the power supply unit and leave it
open.
Intended Use
The power supply unit is intended exclusively for the power
supply of Bosch industrial straight screwdrivers of the
C-EXACT series in enclosed locations.
Product Features
The numbering of the product features refers to the illustra-
tion of the power supply unit on the graphics pages.
1 Connection socket on power supply unit PUC-EXACT
2 On/Off switch
3 LED indicator, operational readiness
4 LED indicator, malfunction (overload) (PUC-EXACT-1)
5 Mains cable
6 Socket sleeve on tool cord
7 Tool cord for connecting to the power supply unit PUC-
EXACT
8 Groove in the coupling of the tool cord 7
9 Connection plug of the power cord
10 Connection socket for power cord
11 Power plug
12 On/Off switch of the screwdriver (lever start)
The accessories illustrated or described are not included as stand-
ard delivery.
PUC-EXACT-1
0 602 495 001
1
V 100–240
W 400
Hp 0.54
Hz 50/60
English | 11
PUC-EXACT-3
0 602 495 003
3
100–240
400
0.54
50/60
1 619 929 K08 | (22.12.11)