Beko FS166020 Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

The product will take longer to
reach the set temperature when
recently plugged in or a new
food item is placed inside. This is
normal.
Large quantities of hot food may
have been recently placed into
the product. >>> Do not place
hot food into the product.
The doors were opened
frequently or kept open for
long periods. >>> The warm
air moving inside will cause the
product to run longer. Do not
open the doors too frequently.
The freezer or cooler door may
be ajar. >>> Check that the
doors are fully closed.
The product may be set to
temperature too low. >>>
Set the temperature to a
higher degree and wait for the
product to reach the adjusted
temperature.
The cooler or freezer door
washer may be dirty, worn
out, broken or not properly
settled. >>> Clean or replace
the washer. Damaged / torn
door washer will cause the
product to run for longer
periods to preserve the current
temperature.
The freezer temperature is very
low, but the cooler temperature is
adequate.
The freezer compartment
temperature is set to a very low
degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.
The cooler temperature is very
low, but the freezer temperature
is adequate.
The cooler compartment
temperature is set to a very low
degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.
The food items kept in cooler
compartment drawers are frozen.
The cooler compartment
temperature is set to a very low
degree. >>> Set the freezer
compartment temperature to a
higher degree and check again.
The temperature in the cooler or
the freezer is too high.
The cooler compartment
temperature is set to a very
high degree. >>> Temperature
setting of the cooler
compartment has an effect on
the temperature in the freezer
compartment. Wait until the
temperature of relevant parts
reach the sufficient level by
changing the temperature of
cooler or freezer compartments.
The doors were opened
frequently or kept open for long
periods. >>> Do not open the
doors too frequently.
The door may be ajar. >>> Fully
close the door.
The product may have been
recently plugged in or a new
food item is placed inside. >>>
This is normal. The product will
take longer to reach the set
temperature when recently
plugged in or a new food item is
placed inside.
20
EN

Publicité

Table des Matières
loading

Table des Matières