Setting The Operating Temperature - Beko FS166020 Mode D'emploi

Setting the operating
temperature
The operating
regulated by the temperature control.
1 = Lowest cooling setting (Warmest
setting)
4 = Highest cooling setting (Coldest
setting)
(Or)
Min. = Lowest cooling setting
(Warmest setting)
Warm
1 2
(Or) Min.
Max. = Highest cooling setting
(Coldest setting)
Please choose the setting according
to the desired temperature.
The interior
depends on ambient temperature,
the frequency with which the door is
opened and the amount of food kept
inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
temperature
Cold
3 4 5
Max.
temperature also
OFF
The normal storage temperature
of your appliance should be -18 °C (0
°F). If the thermostat knob is turned
is
counter clockwise
1, the appliance will be switched
off and "click" sound will be heard.
Lower temperatures can be obtained
by adjusting the thermostat knob
towards Position 4.
We recommend
temperature with a thermometer to
ensure that the storage compartments
are kept to the desired temperature.
Remember at take the reading
immediately since the thermometer
temperature will rise very rapidly after
you remove it from the freezer.
Thermostat is located on the rear wall
of the cabinet (See above diagram)
and controlled by the thermostat
knob.
17
EN
from
checking
Thermostat
OFF
position
the