Document Keeping; Limitation Of Responsibility; Transport And Storage; Packing Disposal - tecnodent Sting Mode D'emploi

1.4. D
OCUMENT KEEPING
This manual is part of the equipment and must be conserved until its disposal.
It should be stored in a protected location, but near the equipment for prompt usage if necessary; the user, in case of loss, must
ask a spare copy.
1.5. L
IMITATION OF RESPONSIBILITY
The Manufacturer must be relieved of any responsibility in the following cases:
Improper use or usage by not specifically trained personnel;
Use while neglecting the applicable standards;
Incorrect installation, when not specifically included in the supply contract;
Power supply failure or defects;
Lack of servicing;
Unauthorized modification or interventions;
Use of non-original spare parts, or not model-specific;
Neglecting the instructions for use, even if partial;
Exceptional events.
1.6. T
RANSPORT AND STORAGE
While packed for transport or storage, the chair can be exposed to environmental conditions which do not lie outside the follow-
ing ranges, for a period not exceeding 10 weeks:
Environment temperature range
Relative humidity range (condensation included)
Atmospheric pressure range
1.7. P
ACKING DISPOSAL
The materials mentioned below, used for packing, respect the environment and are 100% recyclable:
Wooden pallet with fumigation treatment;
Cardboard box;
Polythene film or with air bubbles.
Please deliver the packing to an authorized dump collecting these materials.
1.8. E - -
ND OF LIFE EQUIPMENT DISPOSAL INFORMATION
According to 2002/95/EEC and 2003/108/EEC Directives, concerning the reduction of hazardous substances in
electric and electronic equipment, including its waste disposal, Tecnodent specifies the following notes.
This symbol, placed in the identification label, indicates that the equipment collection and disposal, must be
performed separately form other kind of wastes.
The separate collection of end-of-life equipment is organized and managed by the manufacturer. The owner who would like
to dispose this equipment should contact the manufacturer or one of its representatives to allow separate collection of this
end-of-life equipment.
The proper separate collection for recycling, processing and environmentally friendly disposal helps avoiding potential ad-
verse effects on human health, and promotes reuse and recycling of the equipment materials.
The illegal disposal of the product by the owner is subject to the penalties determined by the laws in force.
When the chair reaches the end of its working life, it is necessary to definitely put it out of service, by disconnecting the plug
from the socket and cutting the power supply cable.
.
.
.
Min
-5° C
10%
500 hPa (mbar)
.
.
– 23 –
Operating instructions
Max
+40° C
90%
1050 hPa (mbar)