Introduction; Definitions; General Warning; Purpose Of The Information Contained In This Document - tecnodent StingST Mode D'emploi

1.1. D
EFINITIONS
The following graphic and language definitions have been used in this manual:
NOTE.
Important information, which has to be underlined in relation to the text.
CAUTION.
This message can appear before some procedure descriptions. Non-compliance may cause damage to the
stool.
WARNING.
This message can appear before some procedure descriptions. Non-compliance may cause damage to the
stool and to the operator.
1.2. G
ENERAL WARNING
On request, Tecnodent will make the components part list, descriptions, calibration instructions or other information available,
which will assist the user's technical personnel to carry out repairs of those parts of the stool which are designed by the
manufacturer as repairable.
WARNING.
The manufacturer will accept responsibility for the security, reliability and performance of the equipment
on the following conditions:
Installation and any repairs or modifications are carried out by authorized personnel only;
The equipment is used in accordance with the operating instructions.
NOTE.
Please note that in accordance with Art. 14 of EEC Directive 85/374 "Liability for damages arising from defective
products" implemented in Italy by Presidential Decree dated May 24, 1988 n. 224; "Right to compensation ceases
ten years after the day the manufacturer or the importer within the EU Nations first marketed the product, which is
object of the claim".
1.3. P
URPOSE OF THE INFORMATION CONTAINED IN THIS DOCUMENT
This manual shows the StingST and StingLE stools. It contains information regarding its functions, performances, servicing and
troubleshooting.
This manual is intended for the final user, the professional that uses the equipment to perform his job.
1.4. L
IMITATION OF RESPONSIBILITY
The Manufacturer must be relieved of any responsibility in the following cases:
Improper use;
Lack of servicing;
Unauthorized modification or interventions;
Use of non-original spare parts, or not model-specific;
Neglecting the instructions for use, even if partial;
Exceptional events.
1.5. T
RANSPORT AND STORAGE
While packed for transport or storage the stool can be exposed to environmental conditions, which do not lie outside the
following ranges, for a period not exceeding 10 weeks:
Environment temperature range
Relative humidity range (condensation included)
Atmospheric pressure range
1.6. P
ACKING DISPOSAL
The materials mentioned below, used for packing, respect the environment and are 100% recyclable:
Cardboard;
Polythene with air bubbles.
Collection and recycle of materials used for packing favour saving of raw material and drop in quantity of waste material. Please
deliver the packing to an authorized dump collecting these materials.

1. INTRODUCTION

.
.
.
.
Min
-5 ° C
10%
500 hPa (mbar)
.
– 12 –
Operating instructions
.
Max
+40 ° C
100%
1060 hPa (mbar)