Accessories; Headrests - tecnodent Sting Mode D'emploi

7.1. H
EADRESTS
The Sting chair can be provided with different kinds of headrests.
7.1.1. Headrest type "UNI tappezzato".
This headrest allows the optimum positioning of the patient's
head, according to the required treatment, thanks to its dou-
ble articulating mechanism and the possibility to adjust its
height (see Figure- 10).
OPERATION
To regulate the double articulation, turn clockwise the
"R" handle to unlock the mechanism. To lock the
mechanism in the desired position, turn anti-clockwise
the "R" handle
By pushing the "H" lever, the mechanism is released,
allowing the headrest to freely move to adjust its height.
Releasing the lever, the headrest remains in the selected
position.
MAINTENANCE
The headrest upholstery can be easily replaced, by simply pulling and separating it from its counterpart.
7.1.2. Headrest type ELLE MOBILE or ELLE-2 MOBILE.
These headrests allows the positioning of the patient's head
by adjusting its elongation as well as its inclination angle, as
shown on figure 11.
OPERATION
By pushing the headrest form its back part towards the
patient's head, can be selected the forward position. The
backward position can be reached by pushing the head-
rest from its frontal part, while simultaneously pushing
the release button "T".
By pushing the "H" lever, the mechanism is released, al-
lowing the headrest to freely move to adjust its height.
Releasing the lever, the headrest remains in the selected
position.
MAINTENANCE
The headrest upholstery can be easily replaced, by simply pulling and separating it from its counterpart.
7.1.3. "C95" or "C2002" magnetic pillow.
The magnetic pillow, as shown in figure 12, can be used to
hold the patient's head during a specific treatment. It can be
attached to the surface of the ELLE MOBILE, ELLE-2 MO-
BILE headrest, or in the backrest upper section, using it in the
cases where the patient's height is not enough to reach the
headrest.

7. ACCESSORIES

.
FIG. 10
FIG. 11
FIG. 12
– 35 –
Operating instructions