Chair Operations - tecnodent Sting Mode D'emploi

4.2.2. Sting with programs.
The controls are shown in figure 6.
P Main switch (Power on/off).
Double function foot controls, placed on the base. They control the raising, lowering and backrest tilt manual movements of
L
the chair, as well as the 3 programmable working positions and the automatic reset to "zero" position.
Controls the automatic movement of rinse position, in order to allow the patient's mouth wash and the return to the last
S
working position.
M Stores the programmed working positions.
4.3. C
HAIR OPERATIONS
4.3.1. Sting without programs.
"L" JOYSTICK OPERATION
While keeping the joystick downward the chair lowers.
While keeping the joystick upward the chair lifts.
While keeping the joystick to the right of the chair, the
backrest moves to the vertical position.
While keeping the joystick to the left of the chair, the
backrest moves to the supine position.
While tapping the joystick downward the chair moves
automatically to the reset "zero" position.
"S" BUTTON OPERATION
While pushing "S", the rinse position function is activated; the chair backrest moves up to vertical position to allow the mouth-
wash.
While pushing "S" again, the chair backrest moves back to its last position.
NOTE.
Any switch, if pushed during an automatic movement, works like a security STOP.
NOTE.
Any switch, if pushed during the automatic reset to "zero" position movement, works like a security STOP.
4.3.2. Sting with programs.
"L" JOYSTICK OPERATION
While keeping the joystick downward the chair lowers.
While keeping the joystick upward the chair lifts.
While keeping the joystick to the right of the chair, the backrest moves to the vertical position.
While keeping the joystick to the left of the chair, the backrest moves to the supine position.
While tapping the joystick upward, left or right, the chair moves automatically to the programmed working positions.
While tapping the joystick downward the chair moves automatically to the reset "zero" position.
"S" BUTTON OPERATION
While pushing "S" the rinse position function is activated; the chair backrest moves up to vertical position to allow the mouth-
wash.
While pushing "S" again the chair backrest moves back to its last position.
NOTE.
Any switch, if pushed during an automatic movement, works like a security STOP.
NOTE.
Any switch, if pushed during the automatic reset to "zero" position movement, works like a security STOP.
.
FIG. 7
– 30 –
Operating instructions