Characteristics; Reference Conditions - Chauvin Arnoux C.A 5231 Notice De Fonctionnement

Each press of
this length ...
short
long
(> 2 sec)
Remark: the continuity test
not Auto-range;
3.2.3 The
This key is used to hold the display of the measured value, and
to activate/deactivate the backlighting of the screen.
Each press of
this length ...
short
long
(> 2 sec)

4.1 REFERENCE CONDITIONS

Quantities of influence
Temperature :
Relative humidity:
Supply voltage :
to change the measurement range
manually (span and resolution).
to return to Auto-range mode.
key
 To
measured value ;
 To exit from the
To
backlighting of the screen.
Note: the backlighting is switched off
at the end of 10 seconds.

4. CHARACTERISTICS

... serves to
and diode test
... serves to
hold the
activate /
Reference conditions
23°C ± 2°C
45 % to 75 %
8.5 V ± 0.5 V
English
modes are
display of the
mode .
deactivate the
40 - 117