Functions Of The Keys - Chauvin Arnoux C.A 5231 Notice De Fonctionnement

English
3.1.6 Non Contact Voltage NCV
1. Set the switch to
2.
Move the C.A 5231 (NCV detection zone) close to the
potentially live conductor(s) (presence of phase) ;
3. If a network voltage of 230V is present (Europe model),
the back-lighting lights red, otherwise, it remains off.

3.2 FUNCTIONS OF THE KEYS

The functions of the
successive short or long presses. Each press is confirmed by
an audible signal.
3.2.1 The
This key is used to select the type of measurement and the
display mode and to deactivate the automatic switching off of
the device, at start-up, in combination with the switch. A long
press during start-up, while turning the
position, deactivates automatic switching off. The
not displayed. As default, automatic switching off is activated
and the symbol is displayed.
Remark: the DC mode is activated as default.
E ach pres s of
this length...
short
3.2.2 The
This key is used to choose a measurement range manually.
The range defines the maximum measurement span of which
the device is capable.
Remark: the Auto-range mode is activated as default.
39 - 117
;
, ,
key
Change the nature of the measurement:
AC or DC.
Select the continuity test
test
mode.
key
keys can be accessed by
switch to any
... serves to
symbol is
or diode