Service; Accessories; Warranty - Dustcontrol DC 3800c Twin Mode D'emploi

Service

With cleaning and maintenance on the machine, the power
cable should be disconnected from the supply. Fluids should
not come into contact with the motor. When cleaning with
fl uids the motor should be covered to anoid contact.
Th e fi ne fi lter should be changed at least once per year. Use
only original spare parts. Th e microfi lter should be changed
every 300 running hours. Use breathing protection during
a fi lter change. Th e operation should be performed in a
closed area. Used fi lters should be sealed in a plastic sack
and disposed of properly.
Check regularly that the electrical cable is not damaged.

Accessories

Description
Coupling socket
Coupling socket
Plastic sack, standard
Microfi lter
Fine fi lter, polyester,
with integrated fi lter cover

Warranty

Th e warranty period for this machine is two years and co-
vers manufacturers faults. Th e warranty is valid under the
condition that the machine is used under normal conditions
on the task for which it was designed and is maintained
properly. Normal wear is not covered by this warranty.
Th e DC 3800c Twin should be performance tested at least
once per year because it may be used with hazardous mate-
rials. Worn parts must be replaced. Never compromise the
function of the DC 3800c, use only original spare parts.
For vacuum motor the typical average life of the ori-
ginal brushes is 600 - 700 hours. Th ey can then be
exchanged or complete motor/fan replaced. For 2nd
brush set life is ca. 400 hours and for 3rd brush set ca.
300 hours. After that the commutator is worn out and
the motor needs to be replaced.
Part no Description
2107
Fine fi lter cellulose, with
2129
integrated fi lter cover
4110
42024
Other accessories — see Dustcontrol catalo-
42025
gue.
Service performed by other than Dustcontrol or its aut-
horized agent voids automatically the warranty. No other
warranty express or implied is applicable.
DC 3800c Twin - 10
Part no
42026
Part No 94129