Erase - Teac LP-U200 Manuel Du Propriétaire

LP-U200(EFS)̲A̲spread.qxd 08.5.27 11:05 AM ページ51
Recording 2
C B
A
To stop recording
A
Press the STOP button (H).
To suspend recording temporarily
B
Press the RECORD button (K) during recording.
The unit enters record pause mode.
"REC" and "USB" or "SD" indicator blinks. The red indicator
on the RECORD button blinks.
< To resume recording press the RECORD button (K) again.
< When the unit enters record pause mode, file will not be
divided. If you want to insert a file division, press the TRACK
INCREMENT button before the unit enters record pause mode
or after the unit restarts recording.
Manual file division
C
It is possible to divide the recording into files while recording.
While recording, press the TRACK INCREMENT button. The
current file number will be incremented by one.
< The TRACK INCREMENT button works when the
MANUAL/AUTO REC setting is set to MANUAL.
< This button don't work during recording from CD.
< When this button is pressed, a blank of about 1 second will
be made.
During recording from a CD, when the PLAY/PAUSE button
(y/J) is pressed the playback of CD will stop temporarily,
but the recording will not stop and the file will not be divided.
26

Erase

1 3 5 6 7
2 4
Use these steps to select and erase files stored on a USB memory
stick or an SD memory card.
Slot the USB memory stick or the SD memory card that contains
the file you want to erase.
1 In USB or SD mode, press the MENU button.
< To cancel the menu setting mode, leave the unit idle for a
minute, or press the STOP button (H).
2 Turn the FUNCTION/REC LEVEL/SELECT knob to select
"ERASE".
3 Press the PROGRAM/ENTER button.
4 Turn the FUNCTION/REC LEVEL/SELECT knob to select
the file to erase.
The file name appears on the display.
Partes del giradiscos
A
G
A giradiscos
B tornillo que ajusta el giradiscos para su transporte
Antes de usarlo, afloje completamente el tornillo girándolo en el sentido de las agujas del
reloj con una moneda o destornillador.
Al transportar la unidad, gire el tornillo en sentido contrario a las agujas del reloj para
fijar el giradiscos.
C palanca de cue
Use esta palanca para levantar el brazo de tonos.
D soporte para brazo de tonos
E selector de velocidad
F brazo de tonos
G
Adaptador G de 45 RPM
B
C
D
E
F
Antes de utilizarlo, desacople
el protector del lápiz (tapa de
plástico blanca) tirando
directamente de la parte
frontal del cartucho en la
dirección de la flecha.
75