Mode; Highlight - Optelec ClearReader+ Manuel D'utilisation

+
Optelec ClearReader

5.2.5.2. Mode

To select the default viewing mode, open the menu and navigate to the View button with the
Back and Forward button or the arrow keys on the Magnification Feature Pack. Open the View
menu with the Play / Pause button. Navigate to the Mode button. Press the Play / Pause button
again to cycle through the available different viewing modes. The viewing modes that can be
selected are Column, Line, Page high contrast and Page full color.
The Page Mode shows a photograph of the document in its original layout, including the
pictures. There are 2 Page modes, the high contrast Page mode and full color Page mode. In
the high contrast Page mode the text is displayed in the selected high contrast colors.
In the Column mode the text is reformatted and displayed in a column to fit the width of the
screen regardless of the text size. Pictures are not shown in this mode.
In Line mode the text is reformatted and displayed in one continuous line, and the highlighted
word is always displayed at the centre of the screen. Pictures are not shown in this mode.

5.2.5.3. Highlight

This option lets you choose a word highlight, line highlight, inverted block highlight, or no
highlight. Both the color of the word and line highlight can be changed from red to yellow. The
use of the inverted block highlight is limited to the Column and Line view. In Page view and
Overview the inverted block highlight will change into an inverted Box highlight. The red word
highlight is the default.
47 English