USB - SD CARD: remarks and compatibility
Note: Always check the compatibility between the Player and the USB / SD-CARD, as certain USB or SD-CARDs may
not be recognized or present difficulties for the Player.
If the USB or SD-CARD is not recognized by the Player, proceed as follows:
Take USB/SD-CARD away. Switch Player off and on again. Insert USB/SD-CARD again.
1 Insert SD/MMC-Card
Insert the SD/MMC-Card with its label showing upward.
The Player will automatically reproduce the contents of
such card, while the display will indicate READ-CARD.
2 Eject SD/MMC-Card
Press Source-key to leave the READ-CARD-function.
Slightly press onto the SD/MMC-card to unlock and
extract the card.
Switch from DVD/USB/SD-Card to external source (AUX-IN)
Volume-Regulation • Switch-On and Switch-Off
Switch from DVD/USB to SD-card
You can connect a USB or SD-card to the DVD-player.
Every time you press the key, you switch amongst the op-
tions DVD – USB and SD-card.
- Select the required input, by means of the remote-control
unit
- The display will show the Menu of the inserted DVD,
while reproduction stops.
Switch to AUX-IN
Press Mode-key to switch from DVD/USB/SD to
AUX-IN 1 / AUX-IN 2.
Volume-Regulation
Press key vol. + to increase the volume.
Press key vol. - to reduce the volume.
Switch-on and Switch-Off
Press key
O
POWER
on the front-panel of the DVD-player or on the remote-
control unit, to switch Player on and off.
3 Insert USB
Insert the USB-card into the related slot. The Player will
automatically reproduce the contents of the USB, while
the display will indicate READ-USB.
4 Eject USB
Press Source-key to leave the READ-USB-function. Ex-
tract the USB-card.
A/V - DVD - AUX
VOLUME
Memory of the reproduction-position
By switching-off the DVD-player or the car-engine
while playback is in course, or by changing the video-
source, reproduction will resume from the interrupted
position. Interruption-memory will be cancelled when
disc is ejected or by pressing RESET.
USB and SD-Cards do not offer this reproduction
memory.
17
POWER