Control-Keys
1 -
POWER
2
-
USB
3
-
DISC-IN
4
-
PLAY / PAUSE
5
-
SKIP
6
-
SOURCE
7
-
MODE
8
-
REMOTE SENSOR
9
-
SD MMC CARD
10
-
AUDIO INPUT
11
-
VIDEO INPUT
12
-
EJECT
USB/SD/MMC NOTES
The USB function (flash memory type) directly depends on the compatibility between the USB-key and the DVD-player.
Therefore always check for this compatibility.
(1) SD/ MMC card supported (max 2 Gb)
(2) USB flash memory 2in 1 (SD/MMC ) supported
(3) Fat 12/fat 16/fat 32 possible
fat 12/16 (dir: 200; file : 1000)
fat 32 (folders : 200; files : 1000) / Fat 32 (folders: 200; files: 1,000)
(4) File name : 32 digits. ˙Folders: 32 digits; Titles: 32 digits
(5) Tag (id3 tag ver 2.0)
title / artist / album: 32 byte supported
(6) Multi card reader NOT supported.
(7) USB 1.1 supported, USB 2.0 supported it can not support USB2.0 speed.
It will automatically read at the same speed as USB1.1
NOTE: whenever the player does not recognise the USB-key introduced, proceed as follows: remove the USB-key and
switch the device OFF and ON again. Then re-introduce the USB-key.
Switch-on / Switch-off.
Slot for USB-introduction.
Slot for disc introduction.
Start disc reproduction / Pause disc reproduction.
Go to subsequent or previous Audio/Video-Track.
Select DVD / USB / SD
Select DVD / AUX-IN 1 / AUX-IN 2
Sensor capturing the remote-control signals.
Slot for SD/MMC-card introduction.
Aux-in AUdio-input
Aux-in Video-input.
Eject inserted disc.
15