301Em Specifications - Honeywell 301EM Mode D'emploi

Programming and Calibration

301EM Specifications

301EM Specifications
Power
Standard Outputs:
Optional Outputs:
Communication
Audible Alarm:
Display :
Visual Indicators:
Length of lines:
Relay Output Rating:
Circuit Protection:
Overvoltage Category:
Operating Environment:
Operating Temperature Range:
Operating Humidity Range:
Operating Altitude:
Enclosure:
Pollution Degree:
Size (HxWxD):
Weight:
Certifications
Optional Horn:
Optional Strobe:
48
22-27 Vac, 50/60 Hz
29-38Vdc, 2 A@ 29 Vdc
4 DPDT relays
3 Outputs at 24 Vdc @ 250 mA each
4-20 mA for each sensor
RS-485: Modbus or Vulbus
65 dBA @ 1 m (3 ft)
Backlit LCD
Green LED: Normal operation
Red LEDs: Alarm A, B and C
Yellow LED: Fault/service alarm
Amber LED: Tx (Activated in network mode)
Up to 2000 feet (609 m) between 301EM
and controller
T-tap: 65 ft. (20 m) maximum per t-tap, to a
total of 130 ft. (40 m)
5A, 30Vdc or 250Vac (resistive load)
Long Time-Lag Polyswitch Type TT
II
Indoor Use
0 to 40°C (32°F to 100°F)
0 to 95% RH (non-condensing)
Up to 3000m (9843 feet)
NEMA 4X ABS - Polycarbonate indoor
2
20.3 x 28 x 7 cm
7.99" x 11.02" x 2.76"
1.02 kg (2.26 lbs)
ANSI/UL 61010-1
CAN/CSA C22.2 No. 61010-1
105dBA, 4-28V, 2800Hz (RFSA)
Min. Voltage 80 dB(A) min. @ 2 ft and 6 Vdc
Max Voltage 90 dB(A) min. @ 2 ft and 28
Vdc
STAS flashing LED
301EM User Manual