Declaration Of Conformity; Warranty Certificate - EMAK BCi 30 Manuel D'utilisation Et D'entretien

11. DECLARATION OF CONFORMITY

The undersigned,
declares, under its own responsibility, that the machine:
1. Category:
2. Brand: / Type:
3. Serial number identification
conforms to the requirements of Directives
conforms to the provisions of the following
harmonized standards
Conformity assessment procedures followed
Measured sound power level
Guaranteed sound power level
Notify body for Directive 2000/14/EC
Type of cutting device
Cutting width
Made in
Date
Technical documentation filed in

12. WARRANTY CERTIFICATE

This machine has been designed and manufactured using
the most modern techniques. The company guarantees its
products for 24 months from the date of purchase, for home
and non-professional use. Warranty is limited to 12 months in
the case of professional us
General conditions of warranty
1. The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical
assistance network, shall replace free of charge any parts
proven defective in material, machining or manufacturing.
The warranty does not affect the purchaser's rights as
established under legislation governing the consequences
of defects in the machine.
2. Technical personnel will undertake the necessary
repairs in the minimum time possible, compatible with
organizational needs.
3. To make any claim under the warranty, this certificate
of warranty, fully completed, bearing the dealer's
stamp and accompanied by the invoice or receipt
showing the date of purchase, must be displayed to
the authorized personnel.
MODEL
SERIAL No
PURCHASED BY MR/MS
Do not send! Only attach to requests for technical warranties.
EMAK spa via Fermi, 4 - 42011 Bagnolo in Piano (RE) ITALY
BATTERY POWERED LOWN TRIMMER
Oleo-Mac BCi 30 – Efco DSi 30
647 XXX 0001 - 647 XXX 9999
2006/42/EC – 2014/30/EU – 2011/65/EC – 2014/35/EU – 2015/863/EU –
2000/14/EC allegato I n° 33
EN 60335-1:2013 – EN 60636-2-91:2015 – EN 55012:2007 / A1:2009
2000/14/EC Annex VI procedura 1
86.2 dB (A)
87 dB (A)
Eurofins Product Testing Italy S.r.l. via Courgnè, 21 – 10156 Torino (TO)
– Italy n° 0477
nylon line
30 cm
Bagnolo in piano (RE) Italy - via Fermi, 4
22/07/2019
Administrative Office – Technical Department
4. The warranty becomes null and void if:
• There is an obvious lack of maintenance, - The product
has been misused or has been modified in any way,
• Unsuitable lubricants and fuels have been used,
• Non-original spare parts or accessories have been
used,
• Work has been done on the product by unauthorized
persons.
5. The warranty does not cover consumables or parts subject
to normal wear.
6. The warranty does not cover work to update or improve
the machine.
7. The warranty does not cover any preparation or
maintenance work required during the warranty period.
8. Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so
shall render the warranty null and void.
9. The warranty does not cover injury or damage caused
directly or indirectly to persons or things by defects in the
machine or resulting from the forced extended disuse of
the machine.
DATE
DEALER
s.p.a.
Fausto Bellamico - President
23
GB