Special Maintenance; Diagnostics - EMAK BCi 30 Manuel D'utilisation Et D'entretien

The machine must be stored in a dry place, protected from bad
weather and out of reach of children.
GB

9. SPECIAL MAINTENANCE

Each maintenance operation not included in this manual must be
carried out exclusively by an Authorized Service Center.
Operations performed at unauthorized centers or by unqualified
persons will void all forms of warranty.

10 . DIAGNOSTICS

Source of problem
1. When operating the switch, the motor does not start
Battery is missing or fitted
incorrectly
Battery is flat
2. The motor stops while working
Battery is missing or fitted
incorrectly
Battery is flat
3. Reduced duration of the battery
Conditions of heavy use with
greater current absorption
4. The battery charger does not recharge the battery (red LED
Dirty contacts
5. The battery charger does not recharge the battery (no LED
No voltage to the battery
charger
Defective battery charger
22
What to do if...
Corrective action
Make sure the battery is properly
inserted
Check the charge status and
recharge the battery
Make sure the battery is properly
inserted
Check the charge status and
recharge the battery
Optimize usage
light on)
Clean the contacts
light on)
Check that the plug is
inserted and that there is
voltage to the power outlet
Replace with original spare
part