Alecto AK-50 Guide De L'utilisateur page 33

Backlighting::
Press the SNOOZE / LIGHT button on the top of the clock to
turn on the backlight. After 15 seconds, the backlight will go
out again (if the projector is on, it also goes out).
When starting with a power adapter, the background lighting
and projector will light up continuously. With dimmer buttons
"▲" and "▼" the background lighting can be dimmed. The
projector can be dimmed with the projector button "
Press SNOOZE / LIGHT button once , backlight and
projector goes to the highest setting and after 15 seconds the
backlight and projector go back to dim mode.
Turn the backlight on continuously by pressing the "dimmer"
buttons ("▲" or "▼") until correct intent is reached.
The projector must be continuously activated with the "
" button.
• The clock loses all its information when the adapter and the
batteries are removed
• Don't expose the clock to direct sunlight, heat, cold, high
humidity or moist environments.
• Only clean the clock with a moist cloth. Don't use cleaning
agents.
• This clock is only suitable for indoor use.
TIPS & REMARKS
-33-
".
HIGH
LOW
OFF
HIGH
LOW
OFF