Alecto AK-50 Guide De L'utilisateur page 32

Snooze function:
While the alarm sounds, press
the SNOOZE / LIGHT square on
top of the clock. The alarm signal
will stop and switch to snooze mode. The snooze icon
flashing. When the snooze mode is activated, the alarm signal
will sound again after 5 minutes. You may activate the snooze
function up to 7 times in a row.
Press a random button (expect the "SNOOZE / LIGHT"
square) to cancel the snooze function beforehand.
Time projection:
Press the projector button to select between
projection in high intensity, low intensity or
off. The projector LED is to focus on the wall
or the ceiling. The projection can be focused
with the focus wheel. To rotate the image of the
projection 180 °, press the projector button for 3
seconds. The image is now rotated 180 °.
If the time projection is on during battery
operation, the projection will stop after 15 seconds.
When activating the SNOOZE / LIGHT button, the
projector and the background lighting switch off
after 15 seconds.
Thermometer display:
If the thermometer value is out of the
measurement range, the display will show: LL.L (below
the minimum temperature) or HH.H (above the maximum
temperature)
S N O O Z E / L I G H T
S N O O Z E / L I G H T
-32-
HIGH
LOW
OFF
starts
HIGH
LOW
OFF