Alecto AK-50 Guide De L'utilisateur page 31

Wake-up time setup:
Press the "ALARM" button for 3 seconds to adjust the alarm
time. Alarm time starts flashing.
Use the "▲" and "▼" buttons to set the desired wake-up time.
Press the "ALARM" button to set the alarm minutes. Press the
"ALARM" button to set the alarm time. When you don't press
any button for 15 seconds after setting an alarm time, the
device will leave the alarm setup menu. The wake-up time(s) is/
are now set.
To activate the corresponding wake-up time, slide the desired
"ALARM" switch upwards. The alarm clock icon will appear
in the display and the alarm / alarm time appears at the bottom
left of the screen..
To stop the wake-up signal:
As soon as the wake-up time is reached, the clock will sound an
alarm signal.
For the first 10 seconds, the alarm signal has a low volume. In
between 10 and 20 seconds, the volume increases. From 20
to 30 seconds the volume is even higher and after 30 seconds
the alarm signal volume is the loudest. The alarm signal will
continue for up to 120 seconds.
Press any button within those 120 seconds to stop the alarm.
After 24 hours, the alarm will start again in connection with the
set alarm time or press the "ALARM" button to switch off the
alarm or the alarm.
-31-