Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Batteries:
Open the battery cover by sliding
the cover forward.
Insert 2 x 1.5V – AA size batteries
(Penlite-LR6). Preferably, use
alkaline batteries. When inserting
the batteries, please observe the
polarity.
Afterwards, close the battery cover
possibly connect the adpter and
place the clock onto a flat surface.
Clock:
After inserting the batteries, the
clock starts synchronizing with the
DCF-77 time signal. The DCF-77 reception icon
starts flashing
to indicate that the DCF-77 signal is being received.
flashing
on
off
busy receiving the
DCF-77 signal
no DCF-77 signal
DCF-77 signal
reception successful
received
The clock automatically starts synchronizing with the DCF-77
signal at 2 or 3am.
You may also manually synchronize the clock by pressing and
holding the "
WAVE" button for 3 seconds. The reception icon
starts flashing.
The synchronizing process will take several minutes.
During summer time the "DST" icon appears. DST stands for
Daylight Saving Time.
-28-
Publicité
