External Component Operations; Playing An External Component - JVC KD-LH1101 Manuel D'instructions

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparation:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
Before operating the external component,
select the external input correctly, follow the
procedure below.
• See also "Changing the general settings
(PSM)" on pages 31 and 32.
1
Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2
Press number button 5 to select "AUDIO"—
Audio category of the PSM settings.
Press ¢ or 4
3
4
Turn the control dial clockwise to select
"Line In."
5
Press SEL (select) to finish the setting.
• For details, see "To select the external
component to use—Ext Input" on page 34.
* Displayed only when one of the following sources is
selected—FM, AM, and CD.
to select "Ext Input"*.
Select the external component correctly,
follow the procedure below.
1
Select the external component
(Line In).
• If "Line In"* does not appear on the display,
see page 34 and select the external input
("Line In") in the "Ext Input" setting.
* Displayed only when one of the following sources is
selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD/CD-CH, the power automatically
comes on. You do not have to press
on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics as
you want. (See pages 27 – 29.)
Note:
You can also change the display pattern by pressing
D (DISP) repeatedly.
CD Line In*
to turn
47