JVC KD-LH1101 Manuel D'instructions page 55

Symptoms
• "No Disc" flashes on the
display.
• "No Magazine" flashes on
the display.
• "No Files" flashes on the
display.
• MP3 disc is skipped or
cannot be played back.
• Noise is generated while
playing an MP3 disc.
• A longer readout time is
required for an MP3 disc
("File Check" keeps flashing
on the display).
• MP3 files cannot be played
back as you have intended
them to play.
• Elapsed playing time is not
correct for an MP3 disc.
• "Reset 08" flashes on the
display.
• "Reset 01" – "Reset 07"
flashes on the display.
• The CD changer does not
work at all.
Causes
No disc is in the magazine.
Discs are inserted upside down.
Discs are unplayable.
No magazine is loaded in the
CD changer.
The current disc does not
contain any MP3 files.
MP3 files do not have the
extension code—mp3 in their
file names.
MP3 files are not recorded in
the format compliant with ISO
9660 Level 1, Level 2, or Joliet.
The file played back is not an
MP3 file (although it has the
extension code—mp3).
Readout time varies due to the
complexity of the folder/file
configuration.
Playback order is determined
when the files are recorded.
This sometimes occurs during
play. This is caused by how the
files are recorded on the disc.
This unit is not connected to the
CD changer correctly.
The built-in microcomputer may
function incorrectly due to
noise, etc.
Remedies
Insert discs into the
magazine.
Insert discs correctly.
Insert playable discs.
Insert the magazine.
Insert a disc that contains
MP3 files.
Add the extension code
—mp3 to their file names.
Change the disc.
(Record MP3 files using a
compliant application.)
Skip to another file or change
the disc. (Do not add the
extension code—mp3 to non-
MP3 files.)
Do not use too many
hierarchies and folders. Also,
do not record any other types
of audio tracks together with
MP3 files.
Connect this unit and the
CD changer correctly and
press the reset button of the
CD changer.
Press the reset button of the
CD changer.
Press the reset button on the
panel holder after detaching
the control panel. (The clock
setting and preset stations
stored in memory are
erased.) (See page 2.)
55