Cleaning; Safety Instructions; Cleaning The Housing; Cleaning The Fan Blades - Boneco F220CC Mode D'emploi

30

CLEANING

en

SAFETY INSTRUCTIONS

Always unplug the BONECO "Clean & Cool" Fan
before you begin cleaning! Failure to do so
can result in electric shock and fatal injury!
Do not use alcohol or corrosive cleaning
agents for cleaning.

CLEANING THE HOUSING

All BONECO "Clean & Cool" Fans are designed for
low-maintenance operation, even after years of
use. In most cases, a dry cloth can be used for cle-
aning.
If stubborn dirt is present, clean the housing using
a damp cloth. Add a small amount of dishwashing
detergent to the water.

CLEANING THE FAN BLADES

1. Tilt the fan unit upwards and loosen the safety
screw.
2. Remove the front grill by turning it counterclock-
wise slightly.
3. Loosen the safety screw in the middle clockwise.
4. Remove the fan blades and clean them with a
damp cloth.
5. Put the unit back together by following the steps
in reverse order.
When reattaching the front grid with the screw,
pay attention to the position of the two half-circle
marks on the front and make sure they form a full
circle.