Boneco F220CC Mode D'emploi page 25

7
Push it in until you feel a noticeable click.
10
Adjust the output using the control.
8
Close the fan unit again with the back grid.
Make sure to set the grid correctly as the de-
vice will otherwise not turn on.
Please note that when turning on the fan for
the first time or after it has not been used for
some time you might hear a slight crackling noise
for the first few minutes. This is the HEPA-ESP filter
gaining an electrical charge which allows it to func-
tion as a highly efficient air filter.
9
Plug the power cord into a power outlet.
BONECO F220CC and BONECO F230CC are only
different in that the BONECO F230CC includes
a second connector piece.
You can use the fan unit with one, with a sec-
ond or without connector pieces. It can be
customized to your needs.
25
en