Intended Use; Explanation Of Symbols - Renkforce MP-2000 Mode D'emploi

2. Intended Use

The power amplifier is used to amplify low-level audio signal in home- or semi-professional audio systems;
it is switched between the signal source to be amplified and the speakers.
The power amplifier is designed to control speakers with a minimum impedance of 4 Ohm per channel. The
device must only be controlled by a low-level audio source.
The product is only approved for connection to 220 - 240 V/50 - 60 Hz alternating voltage.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
Any use other than that described above will damage this product and involves the risk of short circuit,
fire, electric shock, etc.
The entire product must not be modified or converted, and the casing must not be opened.
Observe all safety and assembly notes in these operating instructions!

3. Explanation of Symbols

The lightning symbol in a triangle warns against unprotected live components or elements inside
the housing or "live" connection points. Touching these components or connection points may
pose a danger to life.
Lines must only be connected to such connection points by specialists, or lines ready for connec-
tion must be used.
The device contains no parts that require servicing by the user. Therefore, never open the de-
vice.
The arrow symbol indicates special advice and operating information.
The exclamation mark indicates important notes in these operating instructions that must be
strictly observed.
18