Publicité
Les langues disponibles
Les langues disponibles
WIRING INSTRUCTION
•
There are four coloured wires coming from the top of motor
BROWN - Live wire for fan
BLUE - Neutral wire
YELLOW/GREEN - Ground wire
BLACK - Live wire for light kit
•
Connect the wire of fan with wire from junction box by terminal block. Brown to the live Blue to the neutral, Black
(with light kit only) to the live and Yellow/Green to the ground wire. Always connect the ground wire
(Yellow/Green in colour) first.
INSTALLATION OF LIGHT KIT (OPTIONAL)
To ensure the success of this installation, be sure to read the instructions and review the diagram thoroughly before
beginning. Follow the instructions that are applicable to your light kit model and fan construction.
CAUTION :
SHOULD YOUR FAN BE PACKAGED WITH A LIGHT KIT.
DO NOT ASSEMBLE THE LIGHT KIT TO FAN OTHER THAN THE PACKAGED WITH THE LIGHT KIT.
CAUTION :
TO REDUCE THE RIST OF ELECTRIC SHOCK,
DISCONNECT THE ISOLATED MAIN SWITCH BEFORE ASSEMBLY.
FOR 1LIGHT ASSEMBLY
Install light bulb,60 Watts max.
Attach glass shade into light kit by pushing glass until fully locked.
Operation instruction
1.
The sequence of operation for pull chain is : OFF-HI-MED-LOW
2.
Push the slide switch DOWN for FORWARD and UP for REVERSE action of the blades
3.
Even if your fan is mounted with blades more than 2.35m from the floor, be carefully to avoid placing your raised
arms or any object in the path of the blades.
19
Publicité
