Publicité
Les langues disponibles
Les langues disponibles
Installing the fan
1.
Mounting Plate
2.
Downrod
3.
Motor
4.
Blade
5.
Blade holder
6.
Canopy
Choose a location for mounting the fan where the blades will have at least 2.35m of clearance from all objects. Mount the
outlet box to the ceiling or used existing box. In order to ensure proper support, use two wood screws, to secure the outlet
box to a joist or beam.If the location you have chosen doesn't have a suitable support beam, install a 2"X4" brace between
ceiling joists to support fan.
Secure the mounting plate to the outlet box with two screws provided with outlet
box.
FOR DOWN ROD TYPE MOUNTING
Pass the canopy into downrod. Carefully let the wires pass through the downrod.
Pass the lower end of the downrod into the mounting collar, secure with safety
pin. Spread cotter pin to fix the safety pin. Tighten the set-screws against
mounting collar. See fig. 2A
FOR CLOSE-TO-CEILING TYPE MOUNTING
Secure the canopy to the decorative motor housing with screws and washers.
See fig. 2B
Hang the fan to the j-hook of the mounting plate with the hole on the canopy
hanging on the j-hook.
Make wire connections (See wiring instruction)
Secure the canopy to the mounting plate with four screws provided. Turn the
canopy clockwise if necessary to make sure the installation securely.
Attach blade holders to fan using 2 screws per holder.
18
Publicité
