LaserLiner ThermoVisualizer Mode D'emploi page 25

Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it produces accurate
measurement results. We recommend carrying out calibration once a year.
Technical data
IR sensor
IR optics
Thermal sensitivity
Precision
Measurement range
Display
Image refresh rate
Format
Memory function
Ports
Protection class
Operating conditions
Storage conditions
Power supply / Operating time
Dimensions
Weight
EU directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=thevispl
Subject to technical changes without notice. 18W26
Thermoarray-Sensor 8-14 μm
< 0.1°C @ +30°C temperature resolution
High-quality IR-lens
40° x 40° (FOV),
standard-focus 0,5 m - 5 m
0,1°C
± 2°C or ± 2% of measured value
-20°C ... 250°C (-4°F ... 482°F)
2.8" colour TFT, 240 x 320 pixel
9 frames / sec.
JPEG format, up to 60.000 frames / GB
Micro-SD card up to 8 GB
Mini USB, micro-SD
IP54
-20°C ... 50°C, Max. humidity 15 ... 85% rH,
no condensation, Max. working altitude 2000 m
above sea level
-40°C ... 70°C, Max. humidity 80% rH
4 x AA alkaline batteries / approx. 6 h
97 mm x 74 mm x 234 mm
0,41 kg (incl. batteries)
ThermoVisualizer
25
EN