LaserLiner ThermoVisualizer Mode D'emploi page 16

1 Inserting batteries
Open the battery compartment and insert
batteries according to the symbols. Be sure
to pay attention to polarity.
4
Main Menu
General and measurement-specific settings can be made in the main menu. The menu is controlled with
the two arrow buttons.
!
Inputs must be confirmed by pressing the Trigger button (5). Press the MODE button (b)
to exit the main menu.
16
EN
2 ON / OFF
1 sec
ON
3 sec
OFF
3 Inserting micro-SD card
To insert a micro-SD card, first open the
rubber cover and then insert the memory
card as illustrated. You cannot record
anything without a storage medium.
!
SD card prerequisite:
microSDHC, class 4, FAT32
Main Menu
E: 0.95
HAL Temp: 250°C
LAL Temp: -20°C
Auto off: 1 min
Backlight
Date / Time
Time Stamp
Erase file
Save File as
Noise Filter
1/2
Main Menu
Language
Manual range
2/2