Berner BACOT 12V STARLOCK Notice Originale page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
Application tool
TC-Riff seg-
ment saw blade
Diamond-Riff
segment saw
blade
TC-Riff Delta
plate
TC-Riff grout
and mortar re-
mover
HCS multi
blade
Scraper, fixed
Scraper, flex-
ible
Bi-metal seg-
ment serrated
blade
TC-Riff sanding
finger
TC-Riff plunge
cut saw blade
HCS universal
joint cutter
Fitting/changing the application tool
Remove the application tool if one has already
been fitted.
20 | English
Material
Application
Cement joints, soft
Making cuts near edges, in corners or in diffi-
wall tiles, fibreglass-
cult-to-reach areas;
reinforced plastics,
example: Removing joints between wall tiles
porous concrete
for improvement work, cutting recesses in
tiles, plasterboard or plastics
Cement joints, soft
Precise routing and cutting of tile/joint mater-
wall tiles, epoxy
ial, epoxy resin and fibreglass-reinforced
resin, fibreglass-rein-
plastics;
forced plastics
example: Producing small cut-outs in soft wall
tiles and routing recesses in fibreglass-rein-
forced plastic
Mortar, concrete
Rasping and sanding on a hard surface;
residue, wood, ab-
example: Removing mortar or tile adhesive
rasive materials
(e.g. when replacing damaged tiles), removing
carpet adhesive residue
Mortar, joints, epoxy
Routing and cutting of joint material and tile
resin, fibreglass-rein-
material, as well as rasping and sanding on a
forced plastics, ab-
hard surface;
rasive materials
example: Removing tile adhesive and joint
mortar
Roofing felt, carpets,
Fast and precise cutting of soft material and
artificial turf, card-
flexible abrasive materials;
board, PVC flooring
example: Cutting carpets, cardboard, PVC
flooring, roofing felt, etc.
Carpets, mortar,
Scraping on a hard surface;
concrete, tile adhes-
example: Removing mortar, tile adhesive, con-
ive
crete residue and carpet adhesive residue
Carpet adhesive,
Flexible scraping on a soft surface;
paint residue, silic-
example: Removing silicone joints, carpet ad-
one
hesive residue and paint residue
Insulation material,
Precise cutting of soft materials;
insulation boards,
example: Cutting insulation boards to size, cut-
floor panels, impact
ting protruding insulation material to length so
sound insulation
that it is flush with the surface
boards, cardboard,
carpets, rubber,
leather
Wood, paint
Sanding of wood or paint in hard-to-reach
areas without sanding paper;
example: Sanding off paint between window
shutter slats, sanding wooden flooring in
corners
Fibreglass, mortar,
Plunge cuts in extremely abrasive materials;
wood
example: Routing of thin mosaic tiles
Expansion joints,
Cutting soft materials;
window putty, insula-
example: Cutting silicone expansion joints or
tion materials (rock
window putty
wool)
To remove the application tool, use the hex key
English
(12) to loosen the clamping bolt (11) and remove
the tool.
1 609 92A 4RW • 17.12.18

Publicité

Table des Matières
loading

Table des Matières