Berner BACOT 12V STARLOCK Notice Originale page 17

sion. Breaking water pipes causes property
damage.
Hold the power tool firmly with both hands
u
and make sure you have a stable footing. The
power tool can be more securely guided with
both hands.
When changing the application tool, wear
u
protective gloves.Application tools can be-
come hot when used for prolonged periods of
time.
Do not scrape any dampened materials (e.g.
u
wallpaper) or on damp surfaces. Water enter-
ing a power tool increases the risk of electric
shock.
Do not treat the surface you will be working
u
on with any fluids that contain solvents. Pois-
onous vapours may develop due to the materi-
als heating up when being scraped.
Take particular care when handling scrapers
u
and blades. The application tools are very
sharp. Danger of injury.
In case of damage and improper use of the
u
battery, vapours may be emitted. The battery
can set alight or explode. Ensure the area is
well ventilated and seek medical attention
should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of
u
short-circuiting.
The battery can be damaged by pointed ob-
u
jects such as nails or screwdrivers or by
force applied externally. An internal short cir-
cuit may occur, causing the battery to burn,
smoke, explode or overheat.
Only use the battery with products from the
u
manufacturer. This is the only way in which
you can protect the battery against dangerous
overload.
Protect the battery against heat, e.g.
against continuous intense sunlight,
fire, water and moisture. There is a
risk of explosion.
Product Description and
Specifications
English
Read all the safety and general in-
structions. Failure to observe the
safety and general instructions may
result in electric shock, fire and/or ser-
ious injury.
Please observe the illustrations at the beginning
of this operating manual.
Intended use
English
The power tool is intended for sawing and cutting
wood-based materials, plastic, plasterboard, non-
1 609 92A 4RW • 17.12.18
ferrous metals and mounting elements (e.g. non-
hardened nails, clamps). It is also suitable for
working on soft wall tiles and for dry sanding and
scraping of small areas. It is ideal for working
close to edges and flush with surfaces.
Product features
English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) On/off switch
(2) Battery release button
(3) Battery
(4) Ventilation slots
(5) Orbital stroke rate preselection thumb-
wheel
(6) Battery charge indicator
(7) Tool holder
(8) Clamping lever for depth stop
(9) Depth stop A)
(10) Plunge cut saw blade
(11) Clamping bolt
(12) Hex key
(13) Handle (insulated gripping surface)
(14) Dust extraction system
A)
(15) Sanding plate
(16) Sanding sheet A)
(17) Clamping lever for dust extraction system
(18) Dust extraction outlet
(19) Dust extraction adapter
(20) Dust extraction hose
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.
Technical data
English
Cordless oscillator
Article number
Rated voltage
No-load speed n
0
Oscillation angle
on left/right
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
B)
– during operation and
during storage
A)
A)
A)
A)
A)
A)
A)
BACOT 12V
STARLOCK
334818
V= 12
−1
min 5000–20000
° 1.4
kg 0.97–1.2 A)
°C 0 to +45
°C −20 to +50
English | 17