Fts (Favorite Track Selection) - Audio Cd Only - Philips SACD1000 Mode D'emploi

Shuffle
Press SHUFFLE during play.
The tracks will be played in random order.
To return to normal play, press SHUFFLE again.
Repeat track/disc
To repeat the currently-playing track, press
REPEAT.
will appear on the display.
REPEAT TRACK
To repeat the entire disc, press REPEAT a second
time.
will appear on the display.
REPEAT ALL
To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat or loop a sequence:
Press REPEAT A-B at your chosen starting point;
will appear on the player display.
A
Press REPEAT A-B again at your chosen end
point;
- will appear on the display, and the repeat
A B
sequence will begin.
To exit from the sequence, press REPEAT A-B
again.
Scan
Plays the first 10 seconds of each track on the disc.
Press SCAN.
To continue play at your chosen track, press SCAN
again or press 2 PLAY.
FTS (Favorite Track Selection)
- Audio CD only
- The FTS feature allows you to store your favorite
tracks for a particular disc in the player memory.
- Each FTS program can contain up to 20 tracks.
- Each time an FTS program is played it will be placed at
top of the list. When the list is full and a new program is
added, the last program on the list will be removed from
the list.
- The selections can be called up and played at any time.
- For storing an FTS program, On-screen Display
operation is required.
-
28 OPERATION AUDIO
Storing an FTS program
1 Load a disc and go to Stop mode.
CD
stereo track
stop
stop
fts On Off
track 1 2 3 4 5 6 7 8
program
Clear all
2 Use w (down cursor) to go to the list of available
tracks.
3 Use t and u (left/right cursor) to select tracks from
the list.
To go directly to any track, enter the track number
using the numeric keys 0-9.
4 Store each track by pressing OK.
The track numbers will be added to the list of
selected tracks.
The number of tracks and the playing time of the
program will be shown on the player display and the
audio screen.
When your FTS program is complete, press 2 PLAY to
start play; the FTS program will be automatically
memorized.
Press FTS or use the t u (left/right cursor) to set
FTS to ON or OFF.
Erasing a track from an FTS-program
1 Use w (down cursor) to go to the list of selected
tracks.
2 Use t and u (left/right cursor) to select the track
number you wish to erase. To go directly to any
track, enter the track number using the numeric
keys 0-9.
3 Press OK.
The track number will be erased from the list of
selected tracks.
Erasing the complete program
Use w (down cursor) to select Clear All and press
OK.
The complete FTS program for the disc will be
erased.
Audio Disk Mode
8 10321
time total tracks total time