Operation; General Explanation; Switching On - Philips SACD1000 Mode D'emploi

Operation

General explanation

About this manual
This manual gives basic instructions for operating this
SACD player.
When playing DVDs the player may not respond to all
operating commands. Some DVDs are produced in a
way that requires specific operation or allows only
limited operation during playback. If this is the case,
please refer to the instructions in the disc inlay. When a
appears on the TV screen, the operation is not
permitted by the player or the disc.
Remote control operation
- Unless otherwise stated, all operations can be
performed with the remote control. Always point the
remote control directly at the player, making sure there
are no obstacles in the path of the infra-red beam.
- When there are corresponding keys on the front
panel, these can also be used.
Menu bar operation
- A number of operations can also be performed using
the menu bar on the screen. The menu bar can be
activated by pressing any of the following keys on the
remote control: MENU SYSTEM, T, C, Angle, Audio
Language, Subtitle Language, Zoom and FTS.
- The following functions can be operated via the menu bar:
- Personal Preferences;
- Track/title selection;
- Chapter selection;
- Audio language selection;
- Subtitle language selection;
- Angle selection;
- Zoom;
- Video FTS selection;
- Sound mode;
- Picture-by-picture;
- Slow motion;
- Fast motion;
- Time search.
- The various items can be selected using the t u
(left/right cursor) keys or by pressing the relevant keys
on the remote control.
- By pressing MENU SYSTEM the menu bar will
disappear from the screen.
- When selecting an item in the menu bar, the selected
item will be highlighted and the cursor keys (on the
remote control) for operating the function are displayed
below the icon.
- < or > indicates that more items are available at the
left/right hand side of the menu bar. Press t u (left/right
cursor) to select these items.

Switching on

1 If necessary, switch on the TV and select the video
input for your SACD player.
2 Press ON/OFF on the player front panel or
STANDBY on the remote control.
The player display will light up.
If the player is connected to the TV, the start-up
screen will appear.
OPERATION 23