Teckentrup CarTeck 40.1 Notice De Montage Et D'utilisation page 28

28 install metal stop
Montage Anschlag Torauf. Unbedingt erforderlich !!
Metal stop (for the opening of the door -) It is very important
Vor dem Einschaltung der Steuerung !!!
to attach it to the rail before beginning programming!
1
Open emergency release, and move the door manually
2
to the door-open position.
3
4
Screw the metal stop tightly using a N° 13 spanner.
Engage the emergency release on the underside of the carriage.
5
Ensure that it is firmly engaged!
Subject to technical modifications without prior notice.
1
3
2
Now attach the metal stop to the rail;
the metal stop marks the furthest point
the door can open.
To pre-assemble the metal stop:
Stick the plastic N° 2 centred on N° 1,
and then loosely tighten the screws. It is very
important to attach the metal stop to
the rail before programming the motor.
TP-40. 1 -07/13