JB Systems MCD 200 Mode D'emploi page 3

ENGLISH
OPERATION MANUAL
®
Thank you for buying this JB Systems
please read these operating instructions very carefully.
FEATURES
 Full MP3 Playback (max. 999 MP3-files / 255 Folders on 1 CD)
o MPEG1 layer3 (32 + 44,1 + 48kHz)
o MPEG2 layer3 (16 + 22,05 + 24kHz)
o MPEG2.5 layer3 (8 + 11,025 + 12kHz)
 Supports both CBR and VBR bitrate modes.
 Up to ID3v2 tag support
 Reads CD-DA, CD-R, CD-RW
 Anti-shock Memory 10seconds
 1/75sec Frame search, also on MP3
 Digital scratch effect via jog wheel
 4 Hot Cue buttons can hold cue points and loops!
 Permanent memory for up to 2048 (512 x 4) Cue points and loops
 Seamless real-time loop edit function!
 Full automatic BPM counter
 Pitch Lock (Master Tempo)
 Pitch ranges: +/-4% +/-8% +/-16% +/-100% (up to +/-16% on MP3)
 Pitch bend on jog wheel and buttons for perfect mixes
 Adjustable pitch bend parameter for ultra precise pitch bending (software V22 and up)
 Up to 4 Seamless loops for every track with reloop/stutter
 Real-time cue ("Cue on the fly")
 Ultra fast memory start within 10msec
 Fader start, fader stop, (back cue),
 Auto cue function(-48dB)
 4 different speed scan
 Alphanumeric LCD display (for CD-TEXT and MP3 ID3v2 tags)
 Selectable elapsed, remain and total remain time display
 Jog wheel with special rubber surface
 Single/continuous play
 Relay play allows consecutive playback on two decks
 S/PDIF digital audio RCA coaxial
 60 seconds Transport Protection
 Sleep mode (saves the life span of the laser)
BEFORE USE
Check the contents:
Check that the carton contains the following items:
 MCD200 unit
 User manual
 1 Mains cable
JB SYSTEMS®
USER MANUAL
product. To take full advantage of all possibilities,
1/81
ENGLISH
 1 cinch/cinch cable
 1 mono mini-jack cable for fader start and relay play
SAFETY INSTRUCTIONS:
The lightning flash with arrowhead symbol within the equilateral triangle is
intended to alert the use or the presence of un-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to
the presence of important operation and maintenance (servicing) instructions in
the literature accompanying this appliance.
This symbol means: indoor use only.
This symbol means: Read instructions.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding
temperatures when bringing it into a warm room after transport. Condense sometimes
prevents the unit from working at full performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such
as vases, shall be placed on this appliance. Electric shock or malfunction may result. If a
foreign object enters the unit, immediately disconnect the mains power.
 No naked flame sources, such as lighted candles, should be placed on the appliance.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient
temperatures.
 Always unplug the unit when it is not used for a longer time or before you start servicing.
 The electrical installation should be carried out by qualified personal only, according to
the regulations for electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the
unit.
 The socket inlet shall remain operable for disconnection from the mains.
 The power cord should always be in perfect condition: switch the unit immediately off
when the power cord is squashed or damaged.
 Never let the power-cord come into contact with other cables!
 When the power switch is in OFF position, this unit is not completely disconnected from
the mains!
 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there
are no user serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a
fuse of the same type and electrical specifications!
MCD200 JB SYSTEMS®
CAUTION: To reduce the risk of electric shock, do
CAUTION
not remove the top cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel
only.
2/81
USER MANUAL
MCD200