Cleaning The Espresso Sieves, Sieve Holder And Espresso Outlet - SilverCrest SEMM 1470 A2 Mode D'emploi

5) Allow the milk tank lid 4 to dry if you do not want to use it again
immediately.
6) Close the rubber cover again.
Cleaning the espresso sieves, sieve holder and
espresso outlet
Remove all used powder from the espresso sieves s d after every drink
preparation.
Clean the espresso sieves s d, the sieve holder p and the espresso outlet q
regularly.
1) After you have prepared espresso/cappuccino/latte macchiato and removed
the sieve holder p:
–
Fix the espresso sieve s d in place by flipping the sieve blocker a
upwards and holding it in place.
–
Knock the espresso powder out of the espresso sieve s d.
–
Flip the sieve blocker a back down again.
–
Remove the espresso sieve s d from the sieve holder p.
–
Clean the espresso sieve s d and the sieve holder p in warm water
with a little mild washing-up liquid. Rinse all the parts off afterwards
using clean water.
│ GB │ IE
■ 26 SEMM 1470 A2