Installing Onto An Instrument; Installation Conditions; Installation Examples - Yamaha MLA-200 Mode D'emploi

Installing onto an instrument

Make sure that installation of the
MLA-200 onto the instrument is
performed by a professional installer.
For the installer:
For details on installing, be sure to refer to
the Setup Guide.

Installation conditions

• Install so that the cables on the side
panel face downward.
• Install so that there is no interference
with headphones or connectors on the
instrument.
• Be sure to use the included screws for
the installation.
• Install the screws at least 15 mm inside
the edge of the leg or stand of the
instrument onto which the MLA-200 is
mounted.

Installation examples

Mounted with screws at the top
10
MLA-200 Owner's Manual
CAUTION
Mounted with screws on the side
Mounted with screws at the
bottom
15 mm
or more
15 mm or more