Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
MODEL
5KΏ
potentiometer
(variable resistor)
250V ; 10 A
LED stroboscope,
24V ; 10 A
SRS connector
250V ; 0,25 A
Alligator clips,
600V ; 10 A
Probes,
600V ; 10 A
Acicular probes,
600 V ; 10 A
T-tap,
300V - 5A
4
MULTIPURPOSE CONNECTOR SET
QTY PICTURE
2
2
2
2
2
4
2
APPLICATION DESCRIPTION
Potentiometers can be used for different types of
tests, including coolant temperature sensor, air
charge temperature sensor, oil temperature sensor
etc.
2-colour and 2-way LED.
LED changes colour when shifting between positi-
ve (+) and negative (-).
This connector is extremely useful when the airbag
or the seat belt device
must be replaced. The connector creates a bridge
which allows the control unit not to "see" the
absence of the device
concerned. The connector will be burnt if the
current is over 0.25 A.
Clip the testing part.
Can be used with probes and extended lines
Probe the testing part by means of the prods.
Can be used with alligator clips and extended
lines.
Can be used to capture signal from cables and
connectors without damaging them.
0.7-mm section, made of carbon steel.
Used to take signal from cables, e.g. in tough con-
ditions, without risking damaging adjacent cables.
Can be used with cables Ø 1.5 mm ÷ 3.5 mm
EN
Publicité
