SilverCrest SAE 5 A1 Mode D'emploi page 18

CAUTION
► Use the device only in dry interior rooms.
► Due to the high power consumption, the device must be charged
using a USB mains adapter. Do not charge the device from the USB
port of a PC or notebook.
► Use only the supplied USB charging cable
ed battery.
► Disconnect the USB charging cable
1) Ensure that the device is switched off. Hold down the On/Off button
for approx. 2 seconds to switch off the device.
2) Connect the USB plug on the USB charging cable
USB mains adapter.
3) Remove the protective cover
micro-USB charging socket
off the device and flip it downwards.
4) Connect the micro-USB plug on the USB charging cable
to the DC 5V micro-USB charging socket
The charging process starts and the charging LED
SAE 5 A1
p
when charging is complete.
a
on the device to get to the DC 5V
d
. To do this, pull the protective cover
d
p
to charge the integrat-
p
to a plugged in
p
on the device.
o
lights up red.
GB │ IE
1
a
│
15 ■