Adjust Calf Support; Use Canopy; Switch Handle Direction; Use Front Swivel Lock - Joie Float Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

Adjust Calf Support

see images
16
-
17
There are two recline angles, 1-2
16
for adjustment.
To raise calf support, push the calf support from position 1 to position 2
To lower calf support, press the adjustment buttons on both sides of the calf
- 1
support
17
, and rotate the calf support downwards.

Use Canopy

see images
18
To open the canopy, pull canopy toward front and press stretchers down on both sides.
To fold the canopy, pull up the stretchers on both sides

Switch Handle Direction

see images
19
Switch the handle to the other position while pulling up the reversible sliders (left and right).
Move the handle up and down to make sure it is securely locked.
!
Make sure child's hands and legs are clear from the armrest when switching the handle.

Use Front Swivel Lock

see images
-
20
21
Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel lock on uneven surfaces.

Use Brake

see images
22
- 1
To lock front wheels, step on the brake levers.
22
- 2
To lock rear wheels, step on the brake lever.
22
Tip
The brake must be engaged when placing and removing children.
Tip
Always apply brake when stroller is in stopped position.
Tip
To ensure brake is fully on, gently rock the stroller backwards and forwards before releasing the handle.
!
WARNING To prevent potential hazard, always make sure the parking device for all swiveling wheels are
engaged and the swiveling wheels are locked when you use the handle in reversed position.
13
16
- 2
17
18
- 1
18
and pull canopy toward back.
19
20 21
Lift the brake levers to release wheels.
Lift the brake lever to release wheels.

Adjust Handle

see images
23
Handle can be adjusted to 7 positions.
To adjust the handle, press the left and right handle adjustment buttons at the same time
- 2
handle to a desirable position.
23

Fold Stroller

see images
24
-
25
- 1
Before folding, pull up canopy stretchers.
18
- 1
and squeeze one-hand-fold button
Push secondary lock
24
A click sound means the stroller is folded completely.

Use Accessory

Accessories may be sold separately or may not be available depending on region.
Use Shoulder Harness Cover
The shoulder harness cover can be removed from the webbing. Simply reverse these steps to re-assemble
shoulder harness cover.
Use Armbar Cover
The armbar cover can be removed from the armbar. Simply reverse these steps to re-assemble armbar cover.
Use Head Support
When using head support, Please thread the webbing on the both sides of head support through the shoulder
belt slots on softgoods, then attach the hook and loop fasteners on the end of webbings.
Use Rain Cover
see images
26
To assemble the rain cover, place it over the stroller, and then attach the hook and loop fasteners on the rain
cover.
26
!
When using the rain cover, always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
- 1
23
, and rotate the
- 2
Push the stroller forward to fold.
24
25
14

Publicité

Table des Matières
loading

Table des Matières