Télécharger Imprimer la page

Metz MECABLITZ 36 C-2 Mode D'emploi page 114

Publicité

114
Flash techniques
Tip:
If, for reasons of the film speed used, f/5.6 cannot be set on
Tecniche flash
the flash unit then proceed as follows:
Técnicas de destello
Select an auto aperture of f/8 on the mecablitz and set a
shutter speed of 1/30th sec. and an aperture of f/11 on the
camera.
If f/4 were set as auto working aperture on the mecablitz,
then this would result in a shutter speed of 1/125th sec. at a
lens aperture of f/5.6. This would exceed the camera's flash
sync speed of 1/100th sec. in our example.
Ensure that the source of backlight does not shine
directly into the sensor of the flash unit as this would
confuse the electronic system and falsify the reading.

Publicité

Chapitres

loading

Ce manuel est également adapté pour:

Mecablitz 36 m-1