Chapitre 16
Declaration of conformity (European Economic Area)
The Declaration of Conformity in this document complies with ISO/IEC 17050-1 and EN 17050-1. It
identifies the product, manufacturer's name and address, and applicable specifications recognized
in the European community.
Tout-en-un HP Photosmart série C6200 : Declaration of conformity
Supplier's Name:
Supplier's Address:
declares, that the product
Product Name and Model:
Regulatory Model Number:
Product Options:
Power Adapter:
conforms to the following Product Specifications and Regulations:
EMC:
SAFETY:
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
The product herewith complies with the requirements of the EMC Directive 2004/108/EC and the Low Voltage
Directive 2006/95/EC and carries the CE-Marking accordingly
Additional Information:
1.
San Diego, CA, USA
16 January, 2007
Local contact for regulatory topics only:
EMEA:
Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Böblingen, Germany
U.S.:
Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
194
Renseignements techniques
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Hewlett-Packard Company
16399 West Bernardo Drive
San Diego, CA 92127-1899, USA
HP Photosmart C6200 Series (CC985A)
1)
SDGOB-0714
ALL
0957-2230
CISPR 22:1997+A1:2000+A2:2002 / EN 55022:1998 +A1:2000+A2:2003 Class B
CISPR 24:1997+A1:2001+A2:2002 / EN 55024:1998 +A1:2001+A2:2003 Class B
EN 301 489-1 V1.4.1:2002 / EN 301 489-17 V1.2.1:2002
IEC 61000-3-2:2000+A1:2000+A2:2005 / EN 61000-3-2:2000+A2:2005
IEC 61000-3-3:1994+A1:2001 / EN 61000-3-3:1995+A1:2001
FCC Title 47 CFR, Part 15 Class B / ICES-003, Issue 4
GB9254:1998, GB17625.1:2003
IEC 60950-1:2001 / EN 60950-1:2001
IEC 60825-1 Ed. 1.2:2001 / EN 60825-1+A2+A1:2002 (LED)
GB4943:2001
This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation and
test reports, this number should not be confused with the marketing name or the product numbers.
DoC#: SDGOB-0714-rel.2.0