Shooting Videos - Bushnell Imageview HD Mode D'emploi

SHOOTING VIDEOS (USING VIDEO MODE)
To enter Video mode (from Photo mode), briefly press the POWER/MODE button (C). The red movie camera icon
appears at the top right corner of the display (pg. 4, #8). Start shooting the video at any time by pressing the
OK/SNAP button. The counter at the bottom of the display changes to red and shows the elapsed recording
time. The recording time is limited only by the amount of internal or card memory currently available. You may
record a single long video until you run out of memory or multiple shorter videos by stopping and starting
recording whenever you wish by pressing OK/SNAP. Press OK/SNAP again to stop recording. Press POWER/
MODE to switch back to still photo mode.
The video quality/file size can be set by pressing MENU, select "Size" (if not already highlighted) and press OK/
SNAP. You can the select your preferred video resolution from "HD" (highest quality, largest files) to "QVGA"
(lowest quality, smallest files). Note: regardless of the resolution setting, all videos are recorded in at a 30 fps
frame rate, in .avi format. The ImageView does not record audio.
Press the RIGHT arrow key to review a video after you shoot it. Press the UP arrow key to begin playback, press
it again to pause playback. During playback, the counter on the right displays elapsed time. When you are
ready to return to the live preview display to shoot more videos (or stills), press the POWER/MODE button.
9