Cleaning And Care - Unold 86895 Mode D'emploi

Setting the speed
DE
3. Switch on the appliance by selecting one of the three speed levels and set-
EN
ting the selected speed level via the speed regulator:
ƒ Level 1: Light breeze
FR
ƒ Level 2: Moderate breeze
ƒ Level 3: Strong breeze
NL
ƒ The regulator position "0" switches off the appliance.
4. You can change between the different speed levels at any time.
IT
Swing function/oscillation function
ES
5. Press the oscillation button on the rear of the appliance head downward
(see illustration). The appliance now swings autonomously in a radius of 80°
PL
6. If you want to switch off the swing function, pull the oscillation button
upward.
Setting the tilt angle
You can tilt the motor housing horizontally to a certain
extent (approx. 20°). Slightly unscrew the knurled screw
(see illustration). Tilt the basket cover to the desired
angle. Caution: Only tilt the cover in the intended range
and not beyond the point of tangible resistance, to avoid
damaging the appliance. Fix the fan in place in the set tilt
angle by tightening the knurled screw.
Switching off
7. To switch off the appliance, switch the speed regulator to
"0". When you are no longer using the appliance, unplug
the plug from the electrical outlet.

CLEANING AND CARE

To switch off the appliance, switch the speed regulator to "0", and unplug
mains plug from the electrical outlet.
Never immerse the appliance in water. The motor or electrical components
of the appliance must not get wet.
1. Never use any abrasive scouring agents, steel wool, metal objects, hot clean-
ing agents or disinfectants.
2. Wipe off the stand tube and grille of the fan with a slightly damp cloth.
3. Store the fan in a dry, safe place so that it is protected from dust, impact,
heat and moisture.
18 von 54
Copyright UNOLD AG | www.unold.de
Stand 3.3.2020